CALL WESSLINK072 271 7111CLUBVIEW · CHANGED PROPERTY USE · FENCE RESPONSIBILITY
Will more people be using your Clubview property after a conversion, letting or change of operator? Include the electric fence in the handover. Wesslink can discuss an inspection, electric fence repairs and the records needed for an electric fence COC before you rely on the existing boundary arrangement.
Include any estate or complex name with the Clubview address, and confirm the management instructions and approvals that apply to that property.
BEFORE YOU BOOK
Clubview and the separately named Zwartkop Golf Estate should not be treated as one managed property. Give Wesslink your exact address and any estate name. If a house is being let, adapted for a practice or otherwise used differently, explain the proposed access arrangements without assuming the previous fence layout remains suitable.
Show where people will enter and wait, including any route close to the boundary. Wesslink can inspect the existing fence in relation to that access. A path created for convenience should not be treated as proof that the adjacent installation has been checked for the changed use.
Agree who will receive fault reports, approve repairs and keep the fence documents. Give the tenant the appropriate user information for the installed equipment. Keep maintenance responsibility explicit, particularly where the landlord retains control of other buildings or boundary sections on the same property.
Ask for records of fence work and unresolved faults during the handover. If several contractors have attended, identify what each completed. Wesslink can inspect the present installation rather than relying on an outgoing operator’s informal assurance that the security equipment has always worked.
Describe the entrances, parking access and outdoor areas people will use after the change. These are practical facts for the inspection, not a reason to assume a fault exists. If building or planning approvals are required for the property’s new use, deal with those separately; fence certification does not approve a business or conversion.
For a proposed electric fence installation, obtain the relevant property and management approvals and agree the intended layout before ordering work. Where the existing system can be retained, ask Wesslink to explain the inspection findings and any recommended corrections. The person paying for the work should receive a description of what is included.
INSPECTION & TESTING
A working energiser is one part of the system. The inspection also considers the fence installation, its safety provisions and the test results.
An electric fence certificate follows inspection and testing by a registered person. Defects affecting compliance must be corrected before certification. Read Regulations 12–13 ↗
Identify the equipment and the fence sections it supplies, including alterations and gate crossings.
Inspect the earth system, wires, joints, brackets and insulators, together with the installation’s condition.
Check the safety provisions around the fence, including signs and places where people can approach it.
Explain defects found, agree the repair work and complete the checks needed before certification.
ELECTRIC FENCE COC COSTS
A change-of-use enquiry should explain the future arrangement as well as the current fault, if there is one. Send a sketch or written description of entrances and affected boundaries. Inspection, modifications and certification can then be quoted against a defined job instead of being added to a general refurbishment estimate.
Request a quote for Clubview ↗
No fixed price is assumed before the installation and access requirements are understood.
LET’S ARRANGE THE RIGHT VISIT
Call Wesslink Electrical or prepare a short WhatsApp enquiry.
072 271 7111 ↗
ELECTRIC FENCE COC · CLUBVIEW
Practical answers for owners, sellers and property managers.
Ask for the time, message and any known changes, without attributing the problem to the tenant. Wesslink can arrange electric fence fault finding with the responsible customer and explain what the installation needs.
A lease can describe responsibilities, but ask for the actual electric fence compliance certificate and installation details. Where several premises share one boundary, clarify how that record relates to the property being occupied.
No. An electric fence certificate of compliance concerns the fence installation. Any planning, building or management permission needed for the change of use is separate and must be handled through the appropriate process.
Discuss the equipment and inspection first. Replacement should follow an identified need, not merely a change in who occupies the property. Provide any user manuals or maintenance records that came with it.
Mention that before booking so access can be arranged with the relevant person. The inspection and quotation must be clear about what can actually be inspected rather than treating an inaccessible section as checked.
A registered electric fence system installer may issue an electric fence compliance certificate after the required inspection and testing. An ordinary electrical COC is a separate document.
Ask for the inspection, any repairs and any return visit to be itemised in the quote. The work required depends on what is found; a price should not assume that the fence will pass before it has been inspected.
View our business profile, contact details and latest updates.