CALL WESSLINK072 271 7111CORNERS AND RETURNS · HIDDEN SECTIONS · COMPLETE ASSESSMENT
Can you see the front of your Helderkruin fence clearly, but not the sections turning behind buildings or garden structures? Tell Wesslink about those areas when arranging electric fence repairs or an electric fence COC inspection. The enquiry should describe the actual perimeter, including the parts a street photograph misses.
Do not climb a wall, stand on outdoor furniture or reach around a corner to inspect wires. Explain the difficult area and let the technician plan appropriate access.
BEFORE YOU BOOK
At a Helderkruin home or managed property with changes of direction, separate courtyards or buildings near the boundary, the fence may be difficult to follow from one position. If that is your layout, describe the route as you know it. Point out any areas you cannot safely see rather than treating the accessible frontage as the whole installation.
Explain where the route changes and how that side is normally accessed. Arrange the relevant key or property contact before the visit. Do not assume a sound heard at the front identifies the section needing repair behind the building.
Provide its location and any available work information. Ask for the relevant section to be included in the assessment, particularly if later structures make access more difficult. A repair becoming hidden from normal view should not make its condition irrelevant to the enquiry.
Describe the changes without trying to compare tension or adjust fittings yourself. Electric fence fault finding can investigate the installation and reported symptoms. Ask the technician to explain which differences matter and which work is proposed rather than judging suitability from appearance alone.
Ask the findings to identify sections by recognisable locations, such as the garage return or rear courtyard, where applicable. This helps the person approving work understand what is included. If a relevant area remains inaccessible, ask what further arrangement is needed before the assessment is complete.
For a new electric fence installation or an altered boundary, provide the finished building and garden layout. Discuss corners, returns and future maintenance access before the route is agreed. Obtain applicable shared-property approvals and retain the completed-work information so later occupants can understand the installation beyond its most visible section.
INSPECTION & TESTING
A working energiser is one part of the system. The inspection also considers the fence installation, its safety provisions and the test results.
An electric fence certificate follows inspection and testing by a registered person. Defects affecting compliance must be corrected before certification. Read Regulations 12–13 ↗
Identify the equipment and the fence sections it supplies, including alterations and gate crossings.
Inspect the earth system, wires, joints, brackets and insulators, together with the installation’s condition.
Check the safety provisions around the fence, including signs and places where people can approach it.
Explain defects found, agree the repair work and complete the checks needed before certification.
ELECTRIC FENCE COC COSTS
A Helderkruin quotation should describe the relevant perimeter and any access needed behind buildings or structures. Provide existing plans or photographs if available, without climbing to obtain new ones. Ask whether the proposed work covers the whole concern or only the sections already assessed.
Request a quote for Helderkruin ↗
No fixed price is assumed before the installation and access requirements are understood.
LET’S ARRANGE THE RIGHT VISIT
Call Wesslink Electrical or prepare a short WhatsApp enquiry.
072 271 7111 ↗
ELECTRIC FENCE COC · HELDERKRUIN
Practical answers for owners, sellers and property managers.
Explain the full relevant installation and arrange access to its parts. Ask the technician what must be assessed and what remains inaccessible; a clear frontage should not be treated as a complete view of the perimeter.
Keep useful completed-work information with the certificate. Recognisable locations help the next owner or technician relate the records to the actual installation, especially where several returns look similar.
Report the sound and location as you observed them. Keep away from wires and do not climb to investigate. The technician can assess the relevant installation without asking you to locate the exact defect yourself.
Explain its position before attendance. The professional can advise what access is needed; arrange any necessary changes through the responsible owner and appropriate contractor rather than moving fence components yourself.
A registered electric fence system installer may issue an electric fence compliance certificate after the required inspection and testing. An ordinary electrical COC is a separate document.
Ask for the inspection, any repairs and any return visit to be itemised in the quote. The work required depends on what is found; a price should not assume that the fence will pass before it has been inspected.
View our business profile, contact details and latest updates.